(R&R) Brake Pad - Front
$135
Service
1 hour
LABOR ONLY❗️
Price may vary between year, make & models

STANDARD BRAKE CALIPER - Remove & Replace LABOR ONLY- [Includes: up to 20 miles of travel then $1 per additional mile Clean, lube and/or replace Brake Hardware as necessary.

IF CHANGING BOTH FRONT AND REAR expect to pay double the listed price -10% discount
(R&R) Brake Pad - FRONT & REAR
$270
$237.60
Service
2 hours, 10 minutes
LABOR ONLY❗️
Price may vary between year, make & models

STANDARD BRAKE PADS - Remove & Replace

[Includes: Up to 20 miles of travel then $1 per additional mile
Clean, lube and/or replace Brake Hardware as necessary.]
Brakes- Complete Front
Service
1 hour, 15 minutes
Parts include:

Brake Cleaner
Brake Grease
Brake Pad Set - Front
Brake Rotor Set - Front
Brakes- Complete Rear
Service
1 hour, 15 minutes
Parts needed:

Brake Cleaner
Brake Grease
Brake Pad Set - Rear
Brake Rotor - Rear
Brakes- Complete Front & Rear
Service
2 hours, 30 minutes
Parts needed:

Brake Pad Set - Front
Brake Pad Set - Rear
Brake Rotor Set - Front
Brake Rotor Set - Rear
(R&R) Brake Shoes
$155
Service
1 hour, 10 minutes
LABOR ONLY❗️

*price varies between vehicles*

Front/Rear brake shoe replacement
(R&R) Brake Caliper
Service
1 hour, 30 minutes
LABOR ONLY❗️
*price varies between vehicles*

Work on brake calipers would likely include new brake pads because if the calipers have gone bad, it is very likely that the brake pads are worn out.

Includes the following labor:

Remove and replace brake caliper and pads.
Inspect brake rotors.
Inspect brake line hoses.
Replace brake fluid.
Re-check brake system for fluid leaks.
Bleed the brake system.
Torque wheels to factory specifications.
Check brake system performance.
(R&R) Master brake cylinder
$135
Service
LABOR ONLY❗️
Price may vary between vehicle year, make & model

Please provide correct VIN NUMER when asked for an accurate quote

What to expect:
Master Cylinder Replacement
50 Point inspection
Brake Bleed
$135
Service
LABOR ONLY❗️
Price may vary between vehicle year, make & model

Please provide correct VIN NUMER when asked for an accurate quote

What to expect:
Release air from the brake system
50 Point inspection
Brake Hose/Line
Service
Common Symptoms

If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.

How It is Done

•The vehicle is jacked up and safely supported with steel jack stands.

•The wheel and tire assembly are removed.

•A pan is put in place to catch brake fluid.

•Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.

•Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.

•The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.

•Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.
Brake Inspection
$135
Service
1 hour
What to Expect

A mobile mechanic will come to your home or office to inspect your car’s brake system. The mechanic will visually inspect the master cylinder, the brake lines, calipers, and the rest of the system in order to determine the underlying cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.